Products
-
HX-2900Z Gluing Lamination System for Non-stop paper Roll Rewinding Machine
Equipment introduction
1.The glue lamination system can be configured on non-stop rewinding equipment of different brands (200-600m/min), Synchronize the production speed with the original equipment.
2. Point to point double-sided three-dimensional embossing. Choosing different embossing pattern can produce colored and colorless gluing lamination products.
3. Equipment process: embossing – gluing lamination – Compounding
4. Glue is added automatically.
5.It adopts wallboard and independent motor drive, and the equipment operates stably.
6. Man-machine conversation, easy operation with high production efficiency. Automatic shutdown when base paper breaks. -
HX-690Z Gluing Lamination System for N Fold Paper Towel Converting Machine
Equipment introduction
1. Equipment process: embossing – gluing lamination – Compounding
2. Point to point double-sided three-dimensional embossing. Choosing different embossing pattern can produce colored and colorless gluing lamination products.
3. It can be configured on the customer’s existing N-fold paper towel machine.
4. It adopts wallboard and independent motor drive, and the equipment operates stably.
5. Man-machine conversation, easy operation with high production efficiency. Automatic shutdown when base paper breaks.
6. Glue is added automatically. -
HX-2000G Cotton/Moisturizing Lotion Tissue Coating Machine
Equipment structure and features:
1. The equipment is used for soft coating of non-woven cotton, also can be coated with other liquids, so that the product differentiation production profit double.
2. The equipment adopts frame wall board type, thick and strong, and effectively improves the stability of the whole machine under high speed operation.
3. The whole machine with wall panel,driven by and independent motor,and the tension control can be operated on the PLC.
4. Rewinding smoothly and without crease, and adopts the jumbo roll broken paper detection.
5. Coating material evenly and won’t leak lotion. -
Three Layers Lotion Tissue Coating Machine
Equipment Configuration :
1.Equipment features:Three-layer double-sided coating or three-layer separately coating can be selected.2.Equipment Function: Unwinding– Lotion Coated–Rewinding
3.The whole machine with wall type panel, independent motor drive, tension control digital operation. -
HX-1400 N fold Lamination Hand Towel Production Line
Characteristics:
1. Steel to rubber embossing, pneumatically press. The embossing pattern can be customized according to customer requirements.
2. Single motor segment drive, tension control can be operated on PLC, transmission speed is accurate, less noise.
3. Pneumatically cut and accurate. The structure is simple, easy maintenance, lower blade wastage.
4. Machine equipped with embossing units and glue lamination device. It can produce the regular N fold paper towel and N fold hand towel paper with lamination.
5. Stable vacuum adsorption, the finished product is folded neatly and in place. -
HX-240/2 M Fold hand towel machine
Main Characteristic
1. Steel to steel embossing, pneumatically press. The embossed pattern can be customized.
2. Transmitted by Synchronous belt. The transmitting speed is correct, and the noise is low.
3. It cut paper pneumatically. When machine stopped, the cutting blade can separate from paper automatically, which makes it easy to pass paper through machine.
4. PLC control and electronically count. Equipped with front and back point move switch.
5.M fold hand towel machine with two jumbo roll stands -
HX-210*230/2 Embossed Gluing Lamination Machine(production of 3D embossed facial tissue)
Main Characteristic:
1.Steel to rubber roll embossing, pneumatically press, embossing pattern can be customized.
2. Adopts synchronous belt transmission, transmission ratio is accurate, low noise.
3. Pneumatically type paper cutting blade, auto separation, which makes it easy to pass through the paper.
4. PLC programming control, electronic counting, install the point switch before and after .
5. Gluing lamination device,which can produce Hand towel paper or kitchen towel paper with Glue lamination. -
HX-1400 N fold Lamination Hand Towel Machine
Characteristics:
1. Steel to rubber embossing, pneumatically press. The embossing pattern can be customized according to customer requirements.
2. Single motor segment drive, tension control can be operated on PLC, transmission speed is correct, less noise.
3. Pneumatically cut and accurate. The structure is simple, easy maintenance, lower blade wastage.
4. Machine equipped with embossing units and glue lamination device. It can produce the regular N fold hand towel paper and point to point or cross point N fold hand towel paper with lamination..
5. Stable vacuum adsorption, the finished product is folded neatly and in place. -
HX-230/4 Automatic N fold Hand towel paper machine with gluing lamination
Automatic N-fold Towels Folding machine makes the towel paper to emboss, cut and then interactive folding into “N – shaped” towels , which are widely used in the hotels, airports, offices and kitchens for wiping hands. The towels can be easily drawn out one after another from the paper dispensers or packaging boxes. The Machine with high speed and products are in neat folding.
-
HX-2900B Three-dimensional Embossed Glue Lamination Kitchen Towel Rewinding Machine
1.Three-dimensional embossing effect is good, and choose different embossing pattern can produce the lamination kitchen towel roll of colored or colorless.
2.The glue lamination system can be configured on non-stop rewinding equipment of different brands (200-600m/min).
3.Man-machine conversation, easy operation with high production efficiency. Machine stop when raw paper broke.
4.Press and Convey unit, perforating unit, rewinding unit adopts vertical alignment.
5.Single jumbo roll stand, save production space.(Single or two jumbo roll stands are available according to customer requirements) -
HX-230/2 N Fold Hand Towel Paper Machine (3D Embossed Gluing Lamination Folder)
Main Characteristic：
1.Steel to rubber roll embossing, pneumatically press, embossing pattern can be customized.
2. Adopts synchronous belt transmission, low noise.
3. Pneumatically type paper cutting blade, auto separation when the machine is stopped, convenient to pass through the paper.
4. PLC programming control, electronic counting, equip with front and back inching switches .
5. Machine with two embossing units and one glue lamination device. It can produce N fold towel paper with color glue, to enhance water absorbability. -
HX-2000B 3D Embossing Gluing Lamination Toilet Paper Kitchen Tower Machine
Equipment Introduction
The machine adopts the wall panel type, the man-machine interface operation is adopted in the control system , the programmable controller (PLC) control with stable performance.
1. Adopt PLC programmable control, segmented independent motor drive.
2. Man-machine conversation, easy operation with high efficiency.Tension control digital operation.
3. Machine stop when raw paper broken. Jumbo Roll Paper is pneumatically uploaded onto machine.
4.The rewinding process of the product is tight first and loose afterward, with its tension adjustable. Automatic changing paper roll, rewinding, tail cutting and sealing, then finished log auto unloading.
5. Bearing, electric component and synchronous belt use famous brand.